Pool Equipment Installation in Phoenix, AZ
Pool equipment installation in Phoenix, AZ is where a cheap job gets expensive. A pump with the wrong fittings or a filter sized for a smaller pool will run, badly, for years. A heater starved for gas will not run at all. The Pool Shack installs and replaces pumps, heaters, filters, lights, water levelers, skimmers and handrails. All of it is done under an Arizona KA-5 dual license, from our North Phoenix base.
Overview
Pool Equipment Replacement Sized for a Phoenix Pool
New equipment is only as good as the pad it lands on. Most replacements in the Valley start with a pump that quit in July. The rest start with a heater that will not fire the first cold week of November. The hard part is the sizing. Phoenix pools run long hours in summer. A pump or filter picked off the old label is often the wrong size for how the pool is actually used.
Sizing comes first. That means pool volume, plumbing size, the space on the pad and what the old unit was doing wrong. Then the equipment gets matched to the pool, plumbed properly and run before anyone calls the job done. Pumps sold today have to meet the federal efficiency rule, which is why nearly every replacement is now variable speed. Every install is done under our Arizona KA-5 dual license.
Sized to the pool
Licensed and insured
Explore
Pool Equipment We Install and Replace in Phoenix
Pool Filter Install
Cartridge, sand and DE filters sized to the pool’s turnover, not the old label.
Learn More
Pool Heater Install
Gas heaters and heat pumps sized in BTUs for the pool, the spa and the months you actually swim.
Learn More
Pool Pump Install
Variable-speed pumps that meet the federal rule and cut the summer power bill.
Learn More
Pool Light Install
LED pool and spa lights, replacements for old halogen niches, and color upgrades.
Learn More
Water Levelers
Auto-fill units that keep up with Phoenix evaporation without running the hose.
Learn More
Skimmers and Handrails
Skimmer replacements and core-drilled handrails on existing decks.
Learn More
Also on the pad and deck
Pool Skimmer and Handrail Installation in Phoenix
Two jobs that come up during a remodel or after a leak test. Both need a contractor licensed for the shell and the deck as well as the pad.
Skimmer replacement
Soil movement cracks skimmers away from the shell. The old body is cut out and a new one set. Then it is tied back into the plumbing and the tile line.
Handrails on existing decks
Anchors are core-drilled into the deck. A metal rail is then bonded to the pool’s grounding grid, as the electrical code requires.
Equipment pad plumbing
A cramped pad is best re-plumbed when new equipment goes in. Unions, valves and the right pipe size make the next repair a twenty-minute job.
Bonding and electrical
Every metal rail, pump and heater has to be bonded and grounded to code. This is where unlicensed installs fail inspection.
Common questions
Pool Equipment Installation Questions From Phoenix Pool Owners
How much does it cost to replace pool equipment in Phoenix?
Installed, a variable-speed pump runs about $800 to $2,000, a gas heater $2,500 to $5,000 and a heat pump $3,500 to $7,000. Gas lines, electrical or a new pad add to that. We quote after seeing the pad.
Do I need a permit to replace a pool pump or heater in Phoenix?
A like-for-like pump swap on existing wiring rarely needs one. A new gas heater, a new gas line or a new electrical circuit usually does. A licensed contractor pulls the permit when the city requires it.
Is a variable-speed pool pump worth it in Arizona?
Yes. A Phoenix pump runs eight to twelve hours a day in summer. The 50 to 80 percent power savings of a variable-speed pump add up fast. Most pay for themselves within a few summers.
How long does pool equipment installation take?
A pump, filter or light swap is usually a half day. A heater with a new gas line or electrical circuit takes a day plus inspection. A full equipment pad rebuild runs one to two days.
Do you install pool equipment in Scottsdale, Glendale and Cave Creek?
Yes. Installs run from our North Phoenix base across North Phoenix, Scottsdale, Paradise Valley, Cave Creek, New River and Glendale. Call (480) 798-2888 with the make and model you are replacing.
Can I still buy a single-speed pool pump in Arizona?
Mostly no. Since July 2021 the federal DOE rule has applied to pumps of about one horsepower and up. Single-speed motors cannot meet that efficiency standard. Small booster and spa pumps are the exception.
Should I replace the whole equipment pad at once or one piece at a time?
One piece at a time is fine if the rest is under ten years old. Once the pump, filter and heater are all past that, replacing them together saves labor. The pad also gets plumbed properly once.
Does new pool equipment need to match the old brand?
No. A Pentair pump will run with a Hayward filter. The exception is automation. A control system talks best to its own brand of pump, heater and lights, so those should match.
Can a handrail be added to an existing pool deck?
Yes. The anchors are core-drilled into the deck and set in epoxy or grout. A metal rail then gets bonded to the pool’s grounding grid, as the code requires. Polymer rails skip the bonding.
Can a pool skimmer be replaced without draining the pool?
Yes. The water only needs to drop below the skimmer opening, roughly a foot, not to the floor. The old body is cut out, the new one set, plumbed and tied back into the tile line.
Where We Work
Proudly Serving the Phoenix Area
- Phoenix
- Scottsdale
- Tempe
- Mesa
- Chandler
- Gilbert
- Glendale
- Peoria
Ready When You Are
Book a Pool Equipment Install in North Phoenix
Pumps, heaters, filters, lights, water levelers, skimmers and handrails from one KA-5 licensed crew across the Valley.